Embedded Files
Guide to AR Headset App
The headset application by design is much simpler to ensure the least amount of complexity for the patient.
Opening and Closing ExpandXR
Splash Screen
When you open ExpandXR you'll be met with this splash screen. The splash screen will display two options ‘Standalone Mode’ and ‘Clinic Mode’. Please select ‘Clinic Mode’.
Closing the Application
To close the application, open the admin menu by clicking on the version number at the top left, and then select ‘End’. You should see a message ‘closing app’ and then it should close.
First Time Setup
This window below will be shown to the owner when the application first loads. See the quick start guide for instructions on how to setup your headset.
Messages
Various messages can appear on the headset while ExpandXR is running. Here's what they all mean.
Scanning the Room
Once the Operator has connected to the Headset the Patient will see this screen.
Please note the connection status and ID of the Operator at the bottom.
During this moment the Operator will ask the Patient to look around the room as part of the mapping process, which recognizes floor, walls ceiling, and nearby objects like tables or chairs.
Once the scanning process is sufficient for the Operator they will instruct the Patient to stop and take their position in the room (middle towards the back of the room). Scanning might take up to half a minute.
Session Started
This screen indicates that the session has started but they still need to wait for the Operator to begin the simulation.
Please note this is the last screen the Patient will see before the simulation.
Scenario Paused
During the simulation if the Operator presses the ‘Pause’ button then the Headset will display this message to the Patient.
Scenario Ended
When the Operator has ended the Scenario the Patient will see this screen.
The Operator should then instruct the Patient that a new scenario may begin.
Session Ended
When the Operator has ended the Session the Patient will see this screen.
The Operator should then instruct the Patient to remove the Headset.
Settings Menu
Admin Menu (Hidden Menu)
To open the menu tap the version number in the top left corner
This will reveal a sub-menu, with the following buttons:
End
This will close the app
Debug
This is for debugging or troubleshooting technical issues
Settings
Opens the settings menu
Settings Menu
Headset Name
The headset ID, this is what the headset appears as to the desktop app.
Remote Server
The web address for the ExpandXR server (only used when network mode is remote)
Local IP and Port
The local address of the app (only used when network mode is local)
Network Mode
Demo Mode
Report abuse